Skip to content
FloorLineFloorLine Help

Operator quick card

Print this page and post it at each station, next to the tablet. Press Ctrl+P (Windows) or Cmd+P (Mac) and print it on one Letter page. The site’s menus and this note don’t print. Write your supervisor’s and admin’s names on the lines at the bottom first.

Some buttons on the card show only on plans that include them (Hold on Basic and up; quality checks, lots, and Station down on Mid and up). For the full guide, see Use the tablet.

FloorLine tablet: quick card

1. Sign in

  • Tap your name.
  • Enter your PIN, then tap →.
  • 5 wrong PINs locks you out for 15 minutes. Ask an admin to unlock you.

2. Find your job

  • Tap Work orders (top right).
  • Jobs at this station: Running, Paused, Ready to start, On hold.
  • Tap a job to open it.

3. Start

  • Tap Start when you begin the step.
  • A paused step says Start again.
  • Steps go in order, each at its own station.

4. Stop

  • Break, end of shift, or switching jobs? Tap Stop.
  • The step waits, paused, for anyone to start again.

5. Complete step

  • Step finished? Tap Complete step.
  • The job moves on to the next station.
  • Button off? Record the quality checks or enter the lots first.

6. Hold

  • Can’t go on? Tap Hold, type why, tap Put on hold.
  • Fixed? Open the job and tap Release hold.

7. Quality checks

  • Start the step, type each answer, tap Save.
  • Photo: tap Take a photo.
  • Out of range? Tell your supervisor.

8. Scan a traveler

  • Tap Scan, put the barcode inside the box.
  • Top barcode opens the job. A step’s barcode starts that step.
  • Won’t read? Type it: 1042, or 1042-2 for step 2.

9. Station down

  • Tap Station down, pick why and how long, tap Mark it down.
  • Running jobs stop. Fixed? Tap Back up, then start again.

10. Sign out

  • Walking away? Tap Done.
  • The tablet signs you out after 1 minute idle. Your step keeps running.

11. “No connection”

  • Keep working: Start, Stop, Complete step, and Hold are saved and sent later.
  • Signing in, photos, waste, scrap, and lots wait for the connection.
  • “Didn’t go through”? Check the job, redo it if needed, tap OK.

12. Who to ask

Supervisor:

Admin (PINs, unlock):