# Get started

> From signing up to your first job started and finished on a station tablet, in about half an hour.

Source: https://docs.floorlinehq.com/start/getting-started/ (updated 2026-10-15)

This walk-through takes a new shop from sign-up to a first job worked on the floor. You'll set up two stations, one operator, and one item, then run a work order through a tablet and watch it on Live view.

You'll need about half an hour, a computer, and a tablet or phone to act as the station tablet. If you don't have a spare device yet, a second browser window on your computer works for trying it out.

The screenshots follow a made-up shop, Acme Machining, and its owner, Dana Brooks.

## 1. Create your shop

1. Go to [floorlinehq.com/signup](https://floorlinehq.com/signup).

2. Fill in the form:

   - **Shop name**: your company's name, as people in the shop know it. You can change it later.
   - **Shop address**: the start of your shop's web address, like `acme` for `acme.floorlinehq.com`. Use 3 to 30 letters, numbers, or hyphens. FloorLine tells you right away if it's available. **This address can't be changed later**, so pick one you'll keep.
   - **Your name**, **Work email**, and **Password** (at least 12 characters).

3. Tick the box to agree to the Terms of Service and the Privacy Policy. The news-and-tips box is optional and starts off.

4. Select **Create shop**.

*Screenshot: The Create your shop form filled in for Acme Machining, with the shop address showing as available*

FloorLine creates the shop and takes you to its own address, signed in as the owner. Your shop starts on a **14-day free trial of the Mid plan**, with no credit card. If you don't pick a plan by the end, it moves to the Free plan; nothing you set up is lost. See [Plans and limits](https://docs.floorlinehq.com/start/plans/).

## 2. Confirm your email

A yellow banner at the top of every page says **Confirm your email address**. Open the email FloorLine sent you and follow the link. If it didn't arrive, select **Resend** in the banner.

You can keep setting up while you wait.

*Screenshot: Home for a brand-new shop, with the confirm-your-email banner across the top and empty cards below*

This is **Home**. It has a card for each part of FloorLine, with counts once you have data. The header across the top holds the menus you'll use below. See [Find your way around](https://docs.floorlinehq.com/start/find-your-way/).

As an admin, you'll also see **Get your shop running**: a checklist of the steps below (stations, people, an item with its routing, a first work order, and a tablet). Each one ticks off as you do it, with a link to where it's done, and the checklist goes away once they're all done. **Hide this** puts it away sooner. Stuck on any page? **Help** in the header opens the article for that page.

## 3. Set your time zone and hours

FloorLine uses your shop's time zone for dates and reports, and the planning calendar schedules work only during your hours.

1. Go to **Settings → Shop settings**.

2. Under **Hours of operation**, pick your **Time zone**. If your computer is in the shop's time zone, select **Use this computer's** to fill it in.

3. For each day, tick **Open** and set **From** and **To**, or leave it unticked for a closed day. New shops start at Monday to Friday, 8 to 5.

4. Select **Save settings**.

*Screenshot: Shop settings for a new shop: the shop name, its web address, and the hours table with Monday to Friday open 8 AM to 5 PM*

Time zone and hours are part of planning, which is Mid and up; your trial includes it. More in [Shop settings](https://docs.floorlinehq.com/setup/shop-settings/).

## 4. Add your stations

Stations are the places work happens, in the order jobs usually move through them. For this walk-through, add two: say **Lathe** and **Deburr**.

1. Go to **Settings → Stations**.

2. Type the first station's name in **New station** and select **Add station**.

   *Screenshot: The New station field with Lathe typed in, next to the Add station button*

3. Add the second station the same way.

4. If they're in the wrong order, use the arrows on a station's row to move it earlier or later.

The page shows how many of your plan's stations you're using. Each station can have one tablet, which comes with it. See [Set up stations](https://docs.floorlinehq.com/setup/stations/).

## 5. Add an operator

Operators sign in on the tablet by tapping their name and entering a PIN. They don't need an email address.

1. Go to **Settings → Users**.

2. Select **Add operator**.

3. Enter their **Name** and a **PIN (4 to 6 digits)**. Operators tap their name on the tablet, so if two people share a first name, add a last initial.

4. Select **Save operator**.

5. Tell the operator their PIN yourself. FloorLine doesn't send it anywhere.

*Screenshot: The Add an operator form with Name and PIN fields*

To bring in admins and managers, use **Invite admin or manager** on the same page; they get an email to set their own password. See [Users and roles](https://docs.floorlinehq.com/setup/users/).

## 6. Make an item with a routing

An item's routing is the list of stations it goes through. Every work order for the item follows it.

1. Go to **Stock → Items** and select **Add item**.

2. Type the item's name where it says **Item name**, like "Shaft coupler, 1 in". Leave **Where it comes from** on **Made in house**.

   *Screenshot: A new, empty item page with the Item name field, the Made in house option selected, and Save at the top*

3. Scroll to **Routing** and select **+ Add new line**. Type a station, **Lathe**, and pick it from the list.

4. Select **Add the operation** on that line. In the dialog, type what happens there under **Operation**, like "Turn to size", and select **Done**.

5. Select **+ Add line** and add the second step the same way: **Deburr**, "Break edges".

6. Select **Save** at the top of the page.

On your trial you'll also see sections for stock, the bill of materials, and more. You can leave them for now. See [Set up items](https://docs.floorlinehq.com/setup/items/) and [Routings](https://docs.floorlinehq.com/setup/routings/).

## 7. Create a work order

1. Go to **Floor → Work orders** and select **New work order**.

2. Pick your item under **Item to make**. The form shows the stations it goes through.

3. Enter a **Quantity**. The rest is optional: **Due date**, **Customer**, **Customer PO**, and **Notes**.

4. Select **Create work order**.

FloorLine opens the new order, WO-1001. On Mid and up, the form also shows when the order is expected to be done, worked out from everything already on the floor.

## 8. Print the traveler

A traveler is the paper that goes with the job. On the work order's page, select **Download traveler** and print the PDF.

It has a barcode for the order (WO-1001) and one for each step (WO-1001-1, WO-1001-2), plus the routing, the materials, and lines for who started and finished each step. Operators can scan these barcodes with the tablet's camera. See [Work orders](https://docs.floorlinehq.com/floor/work-orders/).

## 9. Set up a tablet at the first station

The job's first step is at the Lathe, so that's where it shows up first. Turn your tablet into the Lathe's tablet.

1. On the tablet, open your shop's address (like `acme.floorlinehq.com`) in the browser and sign in with your email and password.

2. Go to **Settings → Tablets** and select **Set up this device as a floor tablet**.

3. Pick the **Station** (Lathe). The **Tablet name** fills in as "Lathe tablet"; change it if you like.

4. Select **Start floor mode**.

*Screenshot: The Set up this device form with the Station, Tablet name, and Start floor mode button*

This signs you out on that device and switches it to the floor screen for its station. From now on it stays a floor tablet. Taking it out of floor mode needs a manager's or admin's email and password. See [Set up tablets](https://docs.floorlinehq.com/setup/tablets/).

**Tip:**
  On the floor screen's name grid, **Install app** puts FloorLine on the tablet's home screen so it opens full screen, like an app. On an iPad, you'll get steps to add it from Safari's **Share** menu instead.

## 10. Sign in with the PIN

1. On the floor screen, under **Tap your name**, tap your operator's name.

   *Screenshot: The floor screen's name grid with one operator, Maria Lopez, under Tap your name*

2. Enter the PIN and tap the arrow to sign in.

   *Screenshot: The PIN pad for Maria Lopez with two of four digits entered*

Five wrong PINs in a row lock that person out of the tablets for 15 minutes; an admin can unlock them sooner on the Users page.

## 11. Start and finish a step

Signed in, the operator sees their name at the top, with **Scan**, **Work orders**, and **Done**.

*Screenshot: Signed in on the floor screen: Scan a traveler and Show work orders in the middle, and Scan, Work orders, and Done in the header*

1. Tap **Work orders** (or **Show work orders**) and pick WO-1001. Or tap **Scan a traveler** and point the camera at the printed traveler's barcode.

2. Tap **Start**. The step is now running, and the order is in progress.

3. When the work is done, tap **Complete step**.

4. Tap **Done** to sign out.

*Screenshot: A work order open on the floor screen with its step running, the instructions, the list of steps, and the Stop, Complete step, and Hold buttons*

The job leaves the Lathe's list and moves to Deburr. Set up a tablet there the same way, or finish the order from its page in the office with **Mark complete**.

If the tablet sits idle, it signs the operator out after a minute and goes back to the names. See [Use the tablet](https://docs.floorlinehq.com/floor/tablet/).

## 12. Watch it on Live view

On your computer, go to **Floor → Live view**. There's a card for each station. While a step runs, its job shows on that station's card with the operator's name. When a step is completed, its job card shows **Completed**, flashes green, and fades, and the job turns up as available at the next station.

*Screenshot: Live view on the demo shop: a card per station with available, late, on hold, and efficiency counts, and the jobs running at each*

Live view updates by itself as people tap on the tablets. See [Live view](https://docs.floorlinehq.com/floor/live-view/).

## What's next

You have the whole loop working. From here:

- **Add the rest of your shop.** Add your other stations, people, and items. If you have a lot of data in spreadsheets already, [import it](https://docs.floorlinehq.com/setup/importing/): stations, items, routings, bills of materials, vendors and customers, lots, and open work orders, each from a template (Mid and up, so it's included in your trial).
- **Turn on stock.** Give items a bill of materials and min and max, and stock moves as jobs do. See [How stock moves](https://docs.floorlinehq.com/stock/how-stock-moves/).
- **Pick a plan.** Before the trial ends, the owner chooses a plan under **Settings → Billing**. See [Billing](https://docs.floorlinehq.com/account/billing/).

## Related

- [Welcome to FloorLine](https://docs.floorlinehq.com/start/welcome/)
- [Find your way around](https://docs.floorlinehq.com/start/find-your-way/)
- [Plans and limits](https://docs.floorlinehq.com/start/plans/)
- [Troubleshooting](https://docs.floorlinehq.com/help/troubleshooting/)